Products > Video Mixers and Faders > VMF-2

Model VMF-2

Two Ch. Mixer/Fader with Fade to Black

The VMF-2 is a 2 channel mixer/fader. It will fade from A to B, B to A or A to Black. There is an auto mode that allows the transition to be preset from 0.2 seconds (approx. 6 Frames) to 6 seconds. The transition occurs upon hitting the TAKE button or a GPI trigger. In the A to B mode, the sources must be genlocked. In the A to Black mode, no B input is required. The output is dc clamped to zero Volts. The VMF-2 is 12 Vdc powered, wall module included.

Options available: Rack mount, Y/C, PAL.

Download manual

Specifications - VMF-2

Input/Output: 1 Volt standard video
Input Impedance: HiZ or 75 Ohms 1%, looping (jumper/switch selected)
Output Impedance: 75 Ohms 1%
Video Connector: BNC, 4 pin MiniDIN for Y/C input
GPI Trigger: Contact closure initiates action
Output Protection: Open or Short, infinite duration
Black Output: Sync, Color Burst and 7.5 IRE setup (0 IRE PAL)

Bandwidth: 10 MHz @ 0.5 dB
Diff Gain: 0.1%
Diff Phase: 0.1 deg
S/N: 60 dB
Crosstalk: 60 dB
Size (Head End): 4.1 W x 5.5 D x 1.5 H inches
Size (RCU): 2.5 W x 6.0 D x 1.8 H inches

DC Powered: 11-14 Vdc (see chart for current requirements)
Wall module (included): 120 VAC 60 Hz, 12 Vdc 500 mA, UL Listed
Warranty: Two Years Parts and Labor

Burst Electronics, Inc
Phone (505) 898-1455
FAX   (505) 898-0159

Return to
home page