|
VS8x8 |
The Burst Electronics VS8x8 Video Switch is a crosspoint matrix configuration under microprocessor control. The 8x8 design allows any of 8 inputs to be switched to any or all of the 8 outputs. Inputs and outputs are fully buffered giving a high degree of isolation (60 dB at 5 MHz) between channels.
The VS8x8 is a vertical interval switcher, requiring genlocked video sources for clean switching between inputs. The routing selection is either by front panel thumbwheel switches or RS-232 remote control.
Applications include broadcast, post production, small video studios, industrial and educational installations, surveillance cameras, clubs and sports bars. The flexibility of either front panel or RS-232 control allows for easy integration in manual and remote controlled systems.
Options available: Y/C, Rack mount
Input/Output: 1 Volt standard video
Input Impedance: HiZ or 75 Ohms 1%, looping (jumper/switch selected)
Output Impedance: 75 Ohms 1%
Video Connector: BNC, 4 pin MiniDIN for Y/C input
Output Protection: Open or Short, infinite duration
RS232 speeds 1200, 2400, 4800, or 9600 bps, format 8N1 -
see adapter drawing
Video Standard: Both NTSC and PAL
Gain: Unity
Bandwidth: 10 MHz @ -3 dB
Off Isolation: 60 dB at 5 MHz
Switching: Vertical Interval
Size: 17 W x 1.75 H x 6 D inches
DC Powered: 11-14 Vdc (see chart
for current requirement)
Wall module (included): 120 VAC 60 Hz, 12 Vdc 500 mA, UL Listed
Warranty: Two Years Parts and Labor
|
Burst Electronics, Inc Phone (505) 898-1455 FAX (505) 898-0159 sales@burstelectronics.com |